You are! If you have it I’ll let you test it first since my electrical expertise is limited to smart switches and you seem to know what you are doing far more than I would! Let me know if it ends up working, if not I’ll order the GE available in Canada until you release yours.
One other question - I wanted to use a red switch (non dimmer) for the left switch in the two gang image above. It switches one half of an outlet below that I have a lamp plugged into with a hue bulb. Given it’s below 25w, I still need to order the bypass for this setup, correct? I checked and they used an actual 2 wire with ground romex instead of using a 3 wire and tucking one that could be used as neutral, so I’m stuck with the white and black for the switched outlet.