I just installed a Red Series Dimmer w/neutral and internal relay enabled and so far everything is working just fine.
- I can control the light via the app just fine and also via the dimmer level in the hub(Hubitat) and at the switch paddle.
- Flickering starts at 36% via the switch paddle which is to be expected.
- I did not experience the light coming on by itself after turning it off in the app.
Tested with internal relay disabled and light functions correctly via the app just fine, no flickering. Be sure you have the switch level at 99 before disabling the relay or it will be stuck at that level. If you forget you need to go into the device settings and manually set the level at 99.
I will test next with no neutral.
!!NOTE!!
LIFX bulbs are expected to be on 24/7 so I recommend that the internal relay be disabled, if you don’t do that then we really can’t help you because our switches are not designed to work this way with smart bulbs like LIFX including our own ilumin bulbs.
Edit:
- Tested with no neutral using our bypass device did not work. Light flickered at any level.
- It also reset the bulb requiring me to setup the bulb again in the LIFX app.
Recommendation is that neutral is used for LIFX bulbs.