The manual that came with the switch has 22 parameters. The one from the website has 17.
The Wiring insert told me to use the config button and click 13 times. I was unable to complete this procedure. I was never able to get to the 1 slow and 3 fast blinks. Most I got was 10 blinks.
Crazy times lol. I guess what this shows me is there is still a ton of room for a better user experience so I’ll try to brainstorm a few ways to improve.
As you were going through it, was there anything you could think of to make this easier on future installations for people?
Anyway, glad you were able to get it up and running!
I had the same issue with mine. Configuring from the switch didn’t work. I had to use Hubitat to set Neutral yes/no and 3-way type. It seems it may not default to Yes Neutral like the documents indicate.
I set up a new switch and I now see that it appears to not be saving the setting for 3-way when adjusted from the switch itself. I tried setting it to either kind of 3-way and it failed to update after saving the setting
Not to hijack this thread for another purpose, but since we’re talking about parameters: that chart—as well as the one that came with the dimmer—lists parameter 13 as 1 byte, but mine appears to report that it’s 2 (and works only if I send a new value to it as such). Is this a typo?