# NZW31\_SN (Gen 1) Top Toggle sticking

**URL:** <https://community.inovelli.com/t/nzw31-sn-gen-1-top-toggle-sticking/1617>\
**Category:** General Discussion\
**Created:** [January 5, 2020, 8:28pm UTC](https://community.inovelli.com/t/nzw31-sn-gen-1-top-toggle-sticking/1617 "2020-01-05T20:28:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohnRob](https://community.inovelli.com/user_avatar/community.inovelli.com/johnrob/32/687_2.png) [@JohnRob](https://community.inovelli.com/u/JohnRob)\
**Post date:** [January 5, 2020, 8:28pm UTC](https://community.inovelli.com/t/nzw31-sn-gen-1-top-toggle-sticking/1617/1 "2020-01-05T20:28:17Z")

</div>

I have a NZW31 Gen 1 switch that sticks when the top toggle is pressed. It’s likely been that way from the beginning but only recently am I using the double tap capability.

Has anyone found a solution?

**UPDATE** I popped the switch toggle off the body of the dimmer. On the back were two cross shaped protrusions. I thinned them down a bit with an X-acto, Not the switch works great and the “feel” is better than it was originally.

Thanks  
John
