Assuming you meant SBM Off, Remote Protection On, and Local Protection off, I tried that, and it didn’t work, so I reversed the Remote Protection and Local Protection. That worked. I thought for sure I had tried it, but must not have.
Here’s what worked, and how I achieved it: Smart Bulb Mode Off (Down Paddle + Config x4), Remote Protection Off (Down Paddle + Config x15), Local Protection On (Up Paddle + Config x10). It’s important to note that Local protection needs to be on when doing the config, so if you try the SBM setting, and don’t get the LED indicator flashing, you need to turn it on first.
Thanks for the second set of eyes!