As I grow my Z-wave network, I am learning more about mesh, topology, and repairs.
I have run two Z-Waves repairs over the past couple of days trying to sort some range issues out and to see how the mesh responds. I am having issues with 4 of my Inovelli devices not completing their repair process - or at least that’s what it looks like. 1 LZW30, 2 LZW31, 1 LZW36. See below. The LZW36 is probably 15-feet from the hub so I can’t see how this would be a distance issue. I have a number of other LZW30, 31, and 36 devices that all complete successfully so I’m not really sure why these particular ones are acting up. Node 24 I’m getting a laptop to get the FW updated so I can use my stick (in case someone wants to say “update your FW”).
24 - Island Switch LZW30 - FW 1.11
25 - Office Fan Combo LZW36 - FW 1.36
26 - Lounge Dimmer LZW31 - FW 1.48
29 - Living Rm Dimmer LZW31 - FW 1.48
sys:1 2021-01-09 12:09:08.641 pm trace Z-Wave Node 29: Repair is requesting device associations
sys:1 2021-01-09 12:07:38.587 pm trace Z-Wave Node 29: Repair is requesting device associations
sys:1 2021-01-09 12:06:08.531 pm trace Z-Wave Node 29: Repair is requesting device associations
sys:1 2021-01-09 12:04:35.358 pm trace Z-Wave Node 29: Repair is requesting device associations
sys:1 2021-01-09 12:04:30.217 pm trace Z-Wave Node 29: Repair is updating neighbors
sys:1 2021-01-09 12:04:28.540 pm trace Z-Wave Node 29: Repair setting SUC route
sys:1 2021-01-09 12:04:28.480 pm trace Z-Wave Node 29: Repair pinging
sys:1 2021-01-09 12:04:28.471 pm trace Z-Wave Node 29: Repair starting