Zigbee 2-1 Switch (On/Off & Dimmer) | Project New Horizon (Blue Series)

So Hot Right Now Projects & Roadmaps
,
570

@exces6 – something like this work to clear things up? Open to suggestions and tweaks. I’d put this on the product page, wiring page and manual.

Pro Con of Dumb-Aux-Smart Switch in 3-Way
Pro Con of Dumb-Aux-Smart Switch in 3-Way2000×1000 185 KB

  1. Dimming available if 2-1 is set as a dimmer. If on/off, the aux will also be an on/off.
  2. The aux switch will match all parameters that are set from the smart switch (less the LED Bar parameters) so that whatever is set on the smart switch, when the aux switch is pressed, the smart switch will keep those parameters
  3. Requires ZigBee binding – as of today, this is only available on Home Assistant and Hubitat (SmartThings is a work in progress and we aim to have it completed by launch)
  4. Make sure your hub supports ZigBee binding – as of today, this is only available on Home Assistant and Hubitat (SmartThings is a work in progress and we aim to have it completed by launch)

EDIT: I’d also specify that this is for the 2-1 switch only and make specific charts for each individual switch (as some are different).