Auxiliary Switch | Project Golden Rule (LED Version)

[mamber]

@Eric_Inovelli

If you really want two matching switches, we would encourage you to purchase multiple smart switches

I know there are several of us who have ended up doing this while waiting. It mostly works, but there is at least one ‘fix’ that is needed to the firmware to keep the LED bars more in sync. I documented this back in May and I thought I remembered @EricM_Inovelli acknowleging it. But it hasn’t been fixed yet.

[BUG?] Association not sending 'duration' parameter with MultilevelSet(value,duration) commands

I believe this is a bug in all existing versions of Red Dimmer firmware When a z-wave association is set up with Groups 3-4 (dimming events) and the Source (master) dimmer is issued a MultiLevelSet(value,duration) command with the optional ‘duration’ parameter it appears to only send MultiLevelSet(value) without the duration to the associated dimmers. The Destination (slave) dimmers adjust to the value level at their own default rate, not the duration that was issued on the master.

@Eric_Inovelli

purchase multiple smart switches as they will be able to detect another smart switch

What do you mean be that? I’ve had to manually configure them. Not seen anything about two smart switches detecting each other. Am I missing out on a secret feature?

@Eric_Inovelli

and would only be an extra $7

Also confused by that. If the new non-LED-Bar Aux switch is $18 doesn’t’ that make the “dual smart switch” alternative more like an extra $24? ($18 for the non-led aux versus $42 for the Smart Red Dimmer configured as an Aux)