Firmware Discussion

Topic	Replies	Views	Activity
Firmware v2.31 (Beta) \| LZW42 \| RGBW Bulb This update is mostly for SmartThings users that have not been able to associate their switches with the LZW42 because SmartThings does not fall back to S0 if it fails S2 like it used to. This change adds the following f…	42	3621	September 23, 2022
About the Firmware Discussion category	1	395	February 15, 2021
2x Config button scene missing from Firmware scene-control , red-dimmer	6	550	November 17, 2022
LZW42 Parameters for Fade/Dimming Timing?	2	173	October 26, 2022
How to upgrade MCU firmware from Homeseer homeseer	1	536	September 18, 2022
"Start Level Change" changes lights abruptly hubitat , switches , lighting , troubleshooting , black-dimmer	26	1038	May 30, 2022
Firmware Update - unable to receive=0x01 - SOLVED solved	7	852	April 28, 2022
Lzw30-sn fimware 1.22	0	317	March 2, 2022
LZW30-SN Firmware Version Shows As 1.9	6	647	December 7, 2021
OTA Update Target 1 Failure red-dimmer	9	818	November 5, 2021
What firmware is the LZW42 now shipping with?	2	428	October 6, 2021
Inconsistent transition time across different LZW42s and firmwares home-assistant , zwave-js-2-mqtt , red-a19-rgbw	1	422	September 15, 2021
Red Series Dimmer not dimming since Firmware 1.57 red-dimmer	5	555	September 2, 2021
[BUG?] Association not sending 'duration' parameter with MultilevelSet(value,duration) commands red-dimmer	8	548	August 25, 2021
LZW45 Can't Turn on to a preset brightness if the color is not white?	0	327	August 19, 2021
LZW45 - Custom Pixel effects red-lightstrip	9	818	August 13, 2021
Ilumin RGBW non-repeating option if possible red-a19-rgbw	16	719	May 27, 2021
Firmware v2.30 (Beta) \| LZW42 \| RGBW Bulb red-a19-rgbw	117	5606	February 26, 2021
Is it possible to "UnBrick" an LZW42 Color bulb? solved , troubleshooting , red-a19-rgbw , hubitat	15	757	June 16, 2020
LZW31-SN settings for LZW42 bulb red-a19-rgbw , red-dimmer , smartthings	4	913	March 3, 2020

Firmware v2.31 (Beta) | LZW42 | RGBW Bulb

This update is mostly for SmartThings users that have not been able to associate their switches with the LZW42 because SmartThings does not fall back to S0 if it fails S2 like it used to. This change adds the following f…