Blue Series 2-1 - How to configure 3 Way with 2 blue smart switches

[Bry]

Take a look at these HowTo’s. Switch to switch is at the bottom.

Zigbee2MQTT

How To's | Setup Zigbee Binding - Home Assistant (Zigbee2MQTT)

DISCLAIMER

While we (and our community) try to keep these instructions up to date, it’s often hard due to the many updates to our firmware, Home Assistant app & platform changes, as well as many other factors outside of our control. If any updates/edits need to be made to these instructions, please comment on this thread so we can keep it up-to-date: <a href="https://community.inovelli.com/t/wiki-general-feedback-suggestions-thread/7399" target="_blank" rel="no…

ZHA

How To's | Setup Zigbee Binding - Home Assistant (ZHA)

DISCLAIMER

While we (and our community) try to keep these instructions up to date, it’s often hard due to the many updates to our firmware, Home Assistant app & platform changes, as well as many other factors outside of our control. If any updates/edits need to be made to these instructions, please comment on this thread so we can keep it up-to-date: <a href="https://community.inovelli.com/t/wiki-general-feedback-suggestions-thread/7399" target="_blank" rel="no…