Hey Inovelli fam - just tried hooking up a new Blue Series switch and am having some issues. Not sure if it’s wiring related or not… Setup: Inovelli Blue Switch Single pole along with 2 other switches (both Blue Series) in the same box sharing a neutral Switch turns on dumb LEDs Home Assistant (u…

[image] stefan814: Both load wires are connected to the switch along with a neutral. Can you elaborate on “both”? Is this switch powering two separate sets of lights? Or by both did you mean the black switched hot and white neutral, along with the neutral daisy chained from another switch? …

By both I meant the hot wire and load (to the lights) is connected along with the neutral. The neutral is daisy chained to the other neutral wires from the other two switches and connected to the main neutral line. The switch only powers one set of lights (two LEDs in the image attached below). Att…

Thanks for the pictures. I can’t see how you have your hot wired but I suggest that you double check to make sure the line is really the line. The very common error is for people to have the line and load reversed. Since you have three Inovellis in that box, the neatest way to do it is to run a hot…

Thanks for the tips! The load line goes to the top of the box, and the hot wire line goes to a bundle of other hot wires that I assume is the hot line for all the switches in the box. Will look into jumping in the future, seems efficient.

Not sure what the issue is but a couple things . . Is that light fixture the only one you have? Do you have another Inovelli powering another one somewhere and does that one work ok? Try putting the switch in the on/off mode if you’re in the dimmer mode. If you are in the dimmer mode, is that fi…

Just commenting to say please, PLEASE ensure your line and load wires are not protruding that far out from the switch. This would be a hazard if left as shown.

Hey @stefan814 – can you let me know what the light fixture is (it’s pretty cool looking btw)? I’d like to take a look at the specs. Also, are they flashing when they’re in on/off mode or is this happening in dimmer mode? Lastly, is there a way you can take a video so I can see the behavior? Sorr…

Thanks all! This light fixture is the only one I have of this variety (there are two connected on the same circuit). I’ve tested other switches on the same light fixture just to check (and vice versa) and no luck, so I don’t think it’s the switch. Tried both on/off mode and dimmer with the same re…

I wonder if your fixture has the same technology. “… Sandro also has exclusive Quattro dimming, which means no dimmer switch is required. You can choose from four different levels of light with just the flick of a light switch.” That may be an issue when in dimmer mode (or since it seems the on/of…

[image] harjms: “… Sandro also has exclusive Quattro dimming, which means no dimmer switch is required. You can choose from four different levels of light with just the flick of a light switch.” That may be an issue when in dimmer mode (or since it seems the on/off mode is still clipping). Y…

Inovelli Community

Blue Series - Flashing Lights (Dumb LEDs)

Product Support Wiring Discussion

home-assistant, north-america, advice-requested, lighting

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled