GE Aux switch double/triple tap

[Bry]

@Eric_Inovelli

Yes, this is correct. At this time, scenes are not supported by the aux switch.

However, if you’re using a Z-Wave bulb as you mentioned, you should be able to still control the bulb from the aux switch (ie: dim up/down, turn on/off). You’ll just not have scene control there.

@anon64478871

The GE Aux mimics what the master is. So if the master is a scene switch then the Aux will mimic the same scene.

Not sure which is correct, but these two seem to be in conflict.