[HOW-TO] Using the Z-Wave Association Tool in Hubitat

[EricM_Inovelli]

@anthonyc I posted a little write-up about it here:

[HOW-TO] Using the Z-Wave Association Tool in SmartThings

You have to add the following methods (below). You also need the command “processAssociations()” somewhere appropriate for the specific device. If it is a sleeping device it needs to have this in its WakeUp Notification method. If it is an “always awake” device, it can be put in its “updated()” or “refresh()” method. That method returns the commands as “un-formatted” z-wave commands so they need to be formatted at one point. For example: def cmds = processAssociations() return commands(cmds) p…