Sorting Category
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
SmartThings Device Firmware Update - Secondary Controller Method
I’ve written a tutorial on how to use a USB Z-Wave device as a secondary controller in your SmartThings network to update the firmware of a device. This makes it so you can update the firmware without excluding the devic… |
|
55 | 2328 | April 7, 2021 |
|
About the Sorting Category category
|
|
1 | 24 | April 5, 2021 |
|
[HOW-TO] Using the Z-Wave Association Tool in Hubitat
The Z-Wave Association Tool is an App that was created to allow our customers to easily create device-to-device “associations” with Inovelli devices and other compatible Z-Wave devices. The tool requires special code to … |
|
126 | 5463 | March 4, 2021 |
|
[HOW-TO] Using the Z-Wave Association Tool in SmartThings
The Z-Wave Association Tool is a SmartApp that was created to allow our customers to easily create device-to-device “associations” with Inovelli devices and other compatible Z-Wave devices. The tool requires special code… |
|
127 | 7071 | February 8, 2021 |
|
[RELEASE] Hubitat Z-Wave Firmware Updater
Hubitat Z-Wave Firmware Updater The firmware updater is in the form of a driver. It is a utility based driver similar to the basicZwaveTool. It is designed to be switched to, used to update your devices, and then switch … |
|
59 | 3647 | January 20, 2021 |
|
[HOW-TO] Hubitat: Setting Up "Scenes" in Rule Machine
Note: If you don’t see the option to “Prefill all button actions for”, first go into the Inovelli device page and hit “Save Preferences” with our driver installed. This will send the “numberOfButtons” event that is neede… |
|
56 | 4186 | December 2, 2020 |
|
Inovelli SmartThings Device Handlers Installation & Location
Installation Instructions Please follow the instructions below to install your Inovelli SmartThings Device Handler(s). Open up IDE and go to “My Device Handlers” Then click on, “Create New Device Handler” Next click on… |
|
0 | 2175 | March 30, 2020 |
|
Inovelli Hubitat Drivers Installation & Location
Installation Instructions Please follow the instructions below to install your Inovelli Hubitat Driver(s). Inside the Hubitat web interface, select the “<> Drivers Code” Button on the left side bar Then click, “New Dri… |
|
0 | 974 | March 30, 2020 |
|
[TIP] SmartThings Direct Github Integration
SmartThings users, if you would like to setup your IDE so that you can see device handler updates and easily update them with a few clicks, here are the settings necessary to do so. For easy copy and past: inovellius… |
|
1 | 1010 | January 27, 2020 |
|
Using LED bar as a night light
|
|
10 | 678 | April 13, 2021 |
|
LZW45 Quick Strip Effects Script for Home Assistant
|
|
0 | 119 | January 31, 2021 |
|
LZW45 Pixel Effects Script for Home Assistant
|
|
7 | 156 | March 4, 2021 |
|
LZW45 Custom Effects Script for Home Assistant
|
|
9 | 200 | April 6, 2021 |
|
Is there a way to remove the parent device from google home
|
|
6 | 33 | March 31, 2021 |
|
Need help setting up lzw31 to control smart plug
|
|
1 | 40 | March 30, 2021 |
|
Power Reporting Is Now Inaccurate
|
|
24 | 383 | March 27, 2021 |
|
Problem controlling Ceiling Fan Light with Red Dimmer via Hubitat Rule Machine
|
|
19 | 125 | March 25, 2021 |
|
LZW30-SN How to stop meterReport?
|
|
2 | 49 | March 19, 2021 |
|
LZW45 LED Strip Set Color Temperature in Hubitat Not Working When Strip is Off
|
|
14 | 237 | March 19, 2021 |
|
Going between 100% and 40% on Red Dimmer with Button 1 and 7 (Config/Favorite) with Hubitat
|
|
6 | 96 | March 15, 2021 |
|
Looking for instructions for Red Series On/Off + always on power to smart bulbs
|
|
44 | 3648 | March 17, 2021 |
|
Rule to toggle color temperature and level on button press only setting level
|
|
11 | 97 | March 16, 2021 |
|
Insert for Hubitat Users re: Drivers
|
|
14 | 178 | March 14, 2021 |
|
LZW30-SN and Child LED Device Unresponsive
|
|
1 | 43 | March 13, 2021 |
|
LZW31-SN Button Events Not Sent to Hub - Missing Current States details. Wrong driver?
|
|
5 | 70 | March 10, 2021 |
|
LED notification on red series only for notification?
|
|
3 | 55 | March 10, 2021 |
|
How to change Security Level of Red Dimmer, V2, LZW31-SN - Cause of Association Problem?
|
|
10 | 137 | March 8, 2021 |
|
How to set "Favorite" (Config) buttons for Red Series Fan + Light Favorite" fan and light? And Default turn on value?
|
|
0 | 43 | March 3, 2021 |
|
Can't get LZW31-SN to work locally or on Hubitat
|
|
17 | 158 | March 3, 2021 |
|
LZW45 status reports with zwavejs
|
|
3 | 94 | March 1, 2021 |