My 4-in-1 sensor LZW60 Joins Hubitat but doesn't seem to want to interact at all

Sensors General Discussion
1

I’ve tried different drivers. I’ve reset to factory a number of times. I’ve tried to update the firmware. In all cases, the device just not seem to want to interact with Hubitat beyond indicating it’s joined the network and is “initialized” No data comes back that I can see. Do I have a bad device?

It did work when I first got it. Not sure when it stopped. Running the most current Hubitat software and drivers.

Hubitat Elevation® Platform Version
2.2.8.156
Hardware Version
Rev C-7

Driver

  • Inovelli 4-in-1 Sensor
  • github: InovelliUSA
  • Date: 2021-07-02
  • Copyright Inovelli / Eric Maycock
2

Since the sensor is battery powered you need to “wake” the device. Start the firmware update then press the button on the back of the unit 3 times.

3

Yeah. Did that a dozen times. :slight_smile: Didn’t help. But thank you for the reply.