Ok all – working with the engineer on the hardware and he had some questions.
I know we’ve talked about this in this thread, but I wanted to make sure I have it right for what you’re used to in Europe.
My understanding was that we wanted the main button (the large square button in the middle under the LED Bar) to be a, “rocker” where if you pressed up on the top part it turned the light on and or dimmed if you held it down – and if you pressed on the bottom part, it would turn the light off or dim it down.
Is this correct?
–
Another option would be to have the square part be more of a momentary style switch in that it simply turns the light on and off and you use the top buttons (above the LED Bar) as a dim up/dim down.
–
My thoughts would be to go with the first option (have the square button be more of a rocker that controls on/off/dim) and then use the top two buttons for scene control (multi-taps).
I still envision having multi-taps for the “rocker”, but the main function is to control the load.
What are your thoughts?