Unresponsive Dimmer (LZW31-SN)

[anikkar]

I included the wrong screenshot…sorry about that. Here’s the correct one.

I wasn’t aware of parameter 12…what does that do?

[PJF]

Parameter 12 on dimmer = 4 on switch.

[jerryacrocker]

Fairly new here so hoping someone can break this down for me into the basics as I’m currently working some associations and by what I’m seeing here, I think maybe I’m doing it wrong.

So when doing associations, I need to create one for each of the 3 group types?

Would appreciate an explanation of the logic so I can understand how this works rather than just knowing this needs to be done.

Thanks!

[PJF]

Did you scroll up?

Unresponsive Dimmer (LZW31-SN)

Not associating group 2 will break them if you have different times for the ramp rate vs dimming rate. Otherwise, with the ramp and dimming times all set equal it doesn’t seem to matter if it’s associated or not. I have set those times differently (turns on and off quicker but dims slower so I can get the level I want easier) so I need it associated. Not associating group 4 might mean that the dimmer being controlled by the association might lag behind the other and not reach the setting. As an…

You really shouldn’t hijack someone else’s thread.

[anikkar]

@PJF

Circling back here…reading your last few comments, I’m confused about Parameter 12. You mentioned that I should set it to 11 in one comment and to 4 in another comment

Am I interpreting this that it should be:

• Parameter 12 = 11 on non-load dimmers
• Parameter 12 = 4 on load

Or is it:

• Parameter 12 = 11 on dimmer
• Parameter 12 = 4 on switch

[Laecaon]

Neither

Dimmer = Parameter #12
Switch = Parameter #4

Set Non-Load to 11.

[anikkar]

@PJF

Dimmer = Parameter #12
Switch = Parameter #4

Set Non-Load to 11.

My dimmers don’t show a parameter 12 that looks like it would accept 11 as a setting

[stu1811]

11= all set to one exception hub