Switches General Discussion
Topic | Replies | Views | Activity | |
---|---|---|---|---|
Blue Series 2-1 Hubitat Changelog | VZM31-SN
November 26, 2022 fix Config Default not defaulting all parameters @mamber November 24, 2022 improvements to quickStartEmulation @mamber November 18, 2022 fix startLevelChange with null duration @mamber Novem… |
1 | 409 | December 5, 2022 | |
Blue Series SmartThings Edge Changelog | VZM31-SN, VZM35-SN
January 17, 2024 Adding settings options for firmware 2.17+ of VZM31-SN & firmware 1.05+ of VZM35-SN. See Blue Series Fan Switch Firmware Changelog | VZM35-SN - Switches / Firmware Discussion - Inovelli Community Aug… |
70 | 2333 | February 7, 2024 | |
About the General Discussion category
|
0 | 853 | February 15, 2021 | |
New/Current Hubitat users and our switches !PLEASE READ!
New/Current HE users here that are installing our switches. Please be aware that when you include our switches Hubitat seems to be enforcing to use their versions of the drivers which is fine for most cases but not if yo… |
80 | 9081 | June 26, 2020 | |
[HOW-TO] Using Scenes & Notifications In Homeseer
Below is a brief explanation on how to use scenes and notifications in the Homeseer platform. I’m using the latest Homeseer version (HS3) as of this writing. I’m going to create a single “Event” in Homeseer to show off b… |
6 | 2469 | October 28, 2022 | |
[DEVICE PAGE] Inovelli Dimmer Red Series LZW31-SN
This Z-Wave dimmer is for feature packed in-wall lighting control. It has all the bells and whistles that you have come to expect from Inovelli, with some really unique customization options. Scene support: 15 separa… |
99 | 14857 | January 2, 2024 | |
SmartThings won't let me add more switches
This has come to my attention recently and if this is the case no matter how many times you try to pair or exclude another Inovelli switch it won’t work. You have to go into the IDE and pick the DH, open it in the edito… |
0 | 1085 | January 28, 2020 | |
Compatible Bulbs for Dimmer Switch (Gen 2)
EDIT (November 23, 2021): Please see the resources below. I will be closing this thread as we just launched a bulb compatibility app as well as a submission form. Bulb & Fan Compatibility App (to find/check compatible… |
119 | 14237 | November 23, 2021 | |
How do the switches deal with power cuts?
|
1 | 32 | March 18, 2024 | |
ZHA Firmware Update Guide
|
29 | 2422 | March 18, 2024 | |
How to Control Upper and Lower Cabinet Lighting?
|
16 | 229 | March 18, 2024 | |
House full of LZW31-SN's all stopped working through SmartThings at the same time
|
13 | 169 | March 18, 2024 | |
NZW31 air-gap keeps popping out and turning off the light
|
17 | 1581 | March 18, 2024 | |
Options for light/fan controlled by single switch, that's part of a 4-way switch?
|
1 | 27 | March 18, 2024 | |
Brand new blue series 2 in 1 switch pairs then disconnects constantly
|
11 | 134 | March 18, 2024 | |
Blinking Light on 3-Way Switch when using dummy switch
|
7 | 62 | March 18, 2024 | |
Blues going inactive
|
67 | 592 | March 17, 2024 | |
Blue switches loosing connection to hubitat until air gap reset
|
27 | 1171 | March 16, 2024 | |
LZW30 - Disabling Relay
|
16 | 2970 | March 15, 2024 | |
VZM36 & Home Assistant Errors
|
0 | 62 | March 16, 2024 | |
Blue Switch / HA/ ZHA Unable to bind group to switch
|
50 | 2933 | March 16, 2024 | |
Associating an LZW31-SN with Red Series 2-1
|
8 | 77 | March 15, 2024 | |
Help! Out of the blue (pun intended), Blue 2-1 stopped working
|
4 | 294 | March 14, 2024 | |
Can't change switch LEDs on Zigbee2MQTT 1.36.0
|
14 | 160 | March 14, 2024 | |
Failures sending commands to multiple switches at once
|
0 | 47 | March 13, 2024 | |
Controlling Hue bulbs with Inovelli Blue switches and Hubitat hub
|
5 | 91 | March 13, 2024 | |
Inovelli Red 2-1 leading/trailing edge
|
1 | 61 | March 10, 2024 | |
Hue bulbs randomly flashing on with blue 2-1 switches
|
3 | 69 | March 10, 2024 | |
Red 2-1 Dimmer Switch Not Updating
|
5 | 65 | March 10, 2024 | |
Two 2-1 blues in 3 way configuration- unclear on HA setup
|
3 | 67 | March 10, 2024 |