Using Inovelli Red Series Dimmer to remote dim 1-10v led controller

[jtronicus]

I have 2 inovelli dimmers in a 3-way, and am able to keep the LEDs in sync. Have you seen this post?

Multi-way options

If you want to use all Inovelli switches, you should be able to set up a maximum of a 6-way using associations (as long as you have the ability to change config parameters and set up associations with your hub) Pros: Remote switches do not need to be on the same circuit Status LED is synchronized across all switches “On” is always on, and “Off” is always off Works even if your hub goes down, since the switches talk directly to each other Can control the notification LED for each switch indepe…