Virtual 3-way switch sync

[mikebridges77]

Sorry, I thought I was replying to the thread I started about the Zigbee VZM31-SN.

Blue Smart Dimmer (2-1) 3-Way LED out of sync

I have two Blue Smart Dimmers VZM31-SN acting as controllers for a Blue Fan Canopy Module VZM36. They are both wired with no load with just the neutral and line wires connected. I have it setup with bindings so the paddles dim the canopy light, and the config buttons control the fan with multi-tap. Controlling both the lights and fan work perfectly. But the LEDs on the dimmers do not work as I would expect. I setup two groups. gp_living_room_fan_light: Canopy module endpoint 1, and endpoint 2…