What are the maximum coverage distances? If one of these is in the center of a wall, in a rectangular room, what is the maximum size of the room that a switch would offer complete coverage for?
According to the documentation, the limit for each axis is 600mm. But since thatās less than 2 feet, Iām almost certain they meant 600cm (i.e. 6m), which is a tad less than 20ft and is consistent with other communications. (Donāt know how much of that volume is usable, though. FOV, for example, will eat into it.)
Thank you. Do you happen to know if it sees a āwholeā 180Ā°.
In my experience, it does not see 180. More like 120-140. You can definitely sneak up on it from the side.
Yes, it is cm.
Thanks.
Is it basically one large cone-shaped detection zone in the center, and then we add custom interference/exclusion zones around it? Or does it track the subjectās exact locationāsimilar to the LD2450ābut just limited to a single zone for now?
Actually, my simpler question is: can it detect motion on the right side but avoid triggering anything on the left side when the sensor is pointed straight ahead from the center?
I pre-ordered several units, and some of my switch locations are tricky. Iām trying to figure out whether I need to cancel a few of them.
The advanced configuration guide seems to say that alot more is supported by the hardware but I think configuration may be a challenge: Blue Series mmWave Presence Sensing Dimmer ā¢ Advanced mmWave Configuration | Inovelli Help Center
Specifically, it seems to say that four zones are supported with tracking (including direction and velocity) for up to four people.
Would there be any opportunity to pay for expedited shipping from ShipBob to our final address within the US? These switches are literally the final missing piece before I can pass my electrical inspection, and Iām keen on getting that prior to December 31.
No, that is unfortunately not an option at this time. However if you were an Indiegogo order (which I think you were) you should definitely receive them before then! Anywhere within the US shouldnāt be more than two weeks shipping time once they start which will be within days.
2 Likes
Understood, thank you!
I actually have two orders ā 10 via Indiegogo, and then 25 from the web shop earlier this year. Just really worried about the timing of the 25, haha.
As long as it was placed before Oct (I think Eric said that was the cut off) then it should ship with this batch. I donāt know the speed at which ShipBob works but its definitely faster than if it was just me filling every order by myself! Which is what it normally isā¦
5 Likes
Product Shipping Update
- Products have arrived at both Michigan and California warehouses.
- Customer shipments are expected to commence the week of November 24th, 2025.
Highlights
- Successful arrival of products at both Michigan and California warehouses and are being checked-in.
- New mmWave switch product is now available with the next batch expected to arrive in early December along with the Z-Wave variant and color paddles.
- Local units installed at founderās house with positive feedback.
Timeline
- November 20, 2025: Products arrived at Michigan and California warehouses and are awaiting check-in.
- Week of November 24, 2025: Expected start of customer shipments pending successful check-in.
Decisions
- Decision was made to air-freight (as opposed to traditional sea freight) color paddles.
Disclaimer: This update was generated automatically using AI to summarize recent internal project discussions. Personal names have been omitted. It may omit details or misinterpret context; please reply if clarification is needed.
14 Likes
Did orders start shipping yet?
No, I wish. They are being checked in at the warehouse in California. We just had a limited amount ship here to our warehouse in MI as we have been having a problem with USPS picking up our mail, so we wanted an actual fulfillment company do it this time.
Redacted the names ā although I may release them if they take too long so we can all hound them. They gave me the worst stress in the world because I got an email saying everything had arrived last week and when we asked for an update they said they couldnāt find it (hence the, āthe team has successfully located your shipmentā¦ā statement).
Hopefully things will move along quickly. I still think that by having them handle it, the switches would arrive faster than us manually hoping that USPS picks up the packages.
5 Likes
Thanks for the update! And yes, you have forum full āhoundsā if you need to release us on them 
This is getting exciting and Iām really looking forward to getting these installed and testing them out! If they perform well I think youāll quickly be having trouble keeping them in stock!
The products have been checked into the California warehouse and customers should start seeing shipping notifications within the next few days.
As a reminder, we are shipping all Indiegogo orders first.
1 Like
Great news ā we just got confirmation that the products were checked in and are loaded into their inventory system.
In an effort to keep this thread ācleanā, Iām going to keep it open for a few more days and then close it as weāve successfully completed the project.
I will create a new thread for any issues that arise or enhancements that youād like to see made related to firmware.
I realize everyone is excited (us too!), but it would be very helpful if we could keep the forums clear of, āI ordered on x date, why havenāt I gotten a shipping update yetā type posts and rather reach out to our customer service team.
Otherwise, it quickly turns into a mutiny where people are comparing ship dates and arrival times and itās not very productive.
ā
On a positive note, Iām pumped to see what you guys all have to say and look forward to seeing this in the field
7 Likes
Iām not sure if this was discussed and I missed it or not, but is there a way that the sensor knows this distance of someone in a space.
For example: Iād want to write a rule that if someone is in the shower (furthest away from the sensor), set a timer to flash the light in X minutes. But I wouldnāt want this rule to run if theyāre on the toilet, which is closer to the sensor.
1 Like