I’m trying to get a 3-way setup with two LZW31-SN dimmers switches working. Being able to dim at both ends of a 3-way without “must go through the hub” lag and have both switches stay in sync isn’t asking too much, right? :slight_smile: First the setup: Home Assistant 0.109.6 Aeotec ZW090 Z-Stick…

Have you tried Master dimmer added to group 2 of slave dimmer Slave dimmer added to group 3 of master dimmer I dont think group 2 is kept in sync (it is just basic set commands). This way anything you do on the master switch will be sent to the slave switch to keep it in sync, but the slave swit…