I’ve installed 2x LZW31-SN switches in a single 3-way circuit for a light fixture. I’m using Hubitat and both switches have traveler, neutral, load, and line wires. I’ve configured both switches to “3-way momentary”. If the downstairs switch is on, then the upstairs switch has power and will functio…

Two Inovellis connected together don’t work like regular 3-way switches. Configure the Inovelli in the primary location (where the power is) as a 2-way. You have to connect the two switches via association. See this for more info: Knowledge Base Redirect Inovelli …

3-Way w/ 2 LZW31-SN

Switches Wiring Discussion

kelchm February 19, 2021, 1:25am 12

For whatever reason, what is documented by z-wave alliance appears to be incorrect. I think this post from @EricM_Inovelli explains it best.

1 Like