Blue mmWave detection parameters

Product Support
, , ,
1

I installed my Blue mmWave in my bathroom with two meters to the left, one meter to the right. When sitting on the toilet to the left, near 0m from the wall, it detects movement then when still, loses the presence.

I’m trying to debug this by looking at the mmWave logs but there doesn’t appear to be a simple app in HA to visualize the stay zones. I configured the stay to 18000 and the hold time to 40s. The hold time seems to be working as changing it allows the presence to stay Occupied longer.

The stay does not. As I understand it, it should be able to detect breathing and micro movements which I’m doing. But I can’t tell why it thinks there’s no one there. Would be nice to debug this by one self but happy to take any advice.

2

Are you using the left and right of the switch correctly. I did it backwards. It is from the switch looking out.

3

Yeah from the perspective of the switch, with the wall on my back. There’s an image circulating and that’s what I used as reference.