Blue Series (VZM31-SN) State not properly reported when changed locally

[tieu1991]

When you control the switch from the paddle the state of the light is not updated.
ie: The light is on at 100% and all is properly reported. If I press the down paddle on the switch 1 time, it turns off as it should. But the state reported by the switch is still “on”. I’m using firmware 2.08 with Zigbee2MQTT and HomeAssistant

[1337joe]

Have you tried the fixes from this thread:

Blue 2-1 does not update state via Zigbee

You’ll want to got to the device settings in z2m → reporting tab → add a new reporting entry to report onOff to the coordinator. Admittedly I haven’t configured that reporting myself - just waiting for the next z2m update. In the meantime, I’m using an HA automation that would trigger on mqtt events using a wildcard, zigbee2mqtt/+/action, and then simply publish an mqtt message to force the coordinator to query/update the onOff state for the device triggering the action. (Got this working bef…

[tieu1991]

Thank you, this fixes my problem.

[kreene1987]

Please mark as resolved.