I promise it will be back. This is the only one in market that I know of now that INSTEON is out. It’s taking a bit longer to negotiate with the Z-Wave manufacturer than we anticipated, but we’re making progress.
In addition, there’s an extremely huge B2B account that I’ve been working on for what seems like a year now that wants this switch as part of their portfolio (it will be WiFi/BT, but will share the same internals) and I’ve finally made some headwinds with them and have a call with them today to meet the project manager and hopefully kick off the project.
If we can get that locked down, it definitely helps in our negotiations.
Either way though, the new investment group and partner understands the benefit of the Fan/Light and is fighting to keep it. Worst case scenario, we will move it over to the Zigbee manufacturer and have them recreate it in either Zigbee and/or Z-Wave.
I have one of the LZW36’s and it’s been solid. Was the first Inovelli product I installed and I’ve been wanting to buy more for months. I need at least 2 or 3 more!
The update is great to hear. Hopefully this can happen soon (I know your moving as fast as you can). I am looking to replace some lights with fans. Without pulling a fourth wire for fan control, it seems like the only other option is the Sonoff IFan04 with reflashed firmware. I may go that route for now, but would love to move to a blue/red Inovelli solution.
What about @epow’s question? I would also love a single gang dual switch/dimmer (no module required) that has the ability to control a highly inductive load on one of the circuits.
Yeah it’s definitely a great suggestion and one I believe has legs. It’s just a matter of capital to invest in something like that right now that makes it difficult to bring to life. I do plan on testing out a Kickstarter for the Motion Switch and if that goes well, maybe we can make that our plan moving forward to launch new products. But at $100k a pop for new development, it’s tricky for us at this time
I had a bit of a brainstormed idea this morning on the combo switches, on possibly how you could eliminate the neutral wire. If you have separate wires coming in for the load for the electric motor and light, you could potentially use the trickle load through the light to power the controller, and then control the circuitry for both loads. Obviously, you’d need to prompt the user not to confuse the two, to prevent the trickle from burning out the fan motor.
I just have so many switch locations in my house without a neutral wire, and it would be nice to be able to retrofit those without tearing into the walls.
I would love to see these (or a comparable product) come back as well…especially after just fighting with a pull chain that came off again…my fan is the only thing I can’t control from my desk right now…
I too would love to see the Fan/Light switch come back! Not only me, but several other people I do this stuff for. I have one in our master bedroom, and want to add to two other bedrooms and 3 other spaces in our home. My parents want 3 for their house right from the get go. PLEASE bring these back!
A vote here for a Zigbee version please. With all the availability issues during pandemic and since then, I’ve jumped ship from Z-Wave and moved over to almost entirely Zigbee with the introduction of the Blue Series. Now I see a new Red series 2-1 is being introduced. I really hope a Zigbee fan/light switch with canopy module is next after Blue Fan-Only switch slated for next month. I’d like all my hardwired stuff to share the same technology. Additionally, Blue series has an additional perk for the market as they could theoretically be converted from Zigbee to Matter.
I realize this is probably several years out given the current pace. But, man, would I love to replace my 5 Lutron MA-LFQHW with something remote-controllable and with support for LED bulbs.
I think we’re a bit tapped out on resources right now to take this one on. It was on my list of ideas (still is), but we ended up choosing to go with an On/Off switch and an Outlet for our new projects (and those also entail multiple protocols).
The dual switch is next on my hit-list though once we start cranking out these other projects bc I agree, this needs to happen. I have dual switches in my house that I’d like to replace.
