Lights flickering at low dim level with Blue 2-1

Hello,

Has there been any real investigation into this issue by the Inovelli team? It seems to be a fairly common problem with several threads across both new Blue and Red dimmers reporting the same issue, with all of them reporting other smart switches by different manufacturers do not experience the same issue with the same bulbs.

I think the reported power usage graph reporting above is pretty telling of the issue.

I have been experiencing the issue with all of my switches/bulbs since installed. I have tolerated it until now, but I’m growing increasingly annoyed with it and will eventually consider abandoning my Inovelli switches if this isn’t resolved.

I can help with any troubleshooting necessary:

  • Blue 2-1 dimmers on latest firmware.
  • Hubitat with latest drivers.
  • Bulbs are FEIT retrofit LED cans, Philips retrofit LED cans, and several “Edison” style bulbs from different manufacturers (all advertised as “dimmable.”) All switches are only controlling one type of bulb per switch.
  • All switches wired using neutral
  • All switches Max and Min brightness have been configured per room to lowest lighting point and maximum brightness.
  • None flicker at 100% brightness, but flicker at nearly all levels below 100%, with some points worse than others.
1 Like