Mea culpa: Messed up firmware update - LZW30 (black series)?

Sorting Category
3

@rakeshg - Check out these steps:

12d

Try the steps that GavinCambell found

  1. Change the driver to the firmware updater driver.
  2. Ensure the switch is responding by clicking on Get Version Report.
  3. Put in the URL this is in post 3 of this thread (http://files.inovelli.com/firmware/LZW30-SN_1.17.otz ) and click on Update Firmware let it get to the parsing step
  4. Airgap the switch.
  5. When it says to wake up the sleepy device, push in the airgap switch (quickly). If it takes a few seconds to push in the airgap it likely won’t move on and you’ll have to start over.
    (Slietly condensed version that worked for all of mine)
    [RELEASE] Z-Wave Firmware Updater - #517 by Terk - ⚙️ Custom Apps and Drivers - Hubitat
2 Likes