I have 3 lights in our house that flicker. It’s very intermittent. For example the light could be at 70% dimness for 5 minutes and stable then suddenly a small hiccup and it flickers once, then good for another few minutes. I tried upgrading to firmware 1.61 and didn’t resolve the issue so downgrad…

I’ve ran into the same issue, intermittently. Someone suggested disabling power reporting, as it seems like the issue might be correlated with when the switch is sending power/energy reports. I’d be curious to know if that resolves your issue.

Do you happen to know what configuration item to change to disable the power reporting? I don’t mind trying it just not sure how to disable it.

[image] wes.render: what configuration item to change to disable the power reporting? Set all three to 0. Parameter 18 - Active Power Reports To adjust the threshold at which a power report is sent based on a change in Wattage on your Red Series 2-1 Switch, you would select Parameter 18 wit…

Thanks. I’ve disabled the 3 power reporting parameters on all 20 switches in the house. Will report back after a week if it made a difference or not.

Setting all 3 parameters to 0 for energy reporting seems to have stopped the intermittent flickering.

Unfortunately the flicker persists.

I have a similar problem. Dimmer is a few years old now in normal use. It was never a problem until updating to 1.57. It’s more than just one switch, but not all of them - it’s hard to say? It appears to be related to very specific dimness levels as OP reported. For me it’s like 37/38. I’ve bee…

Update: Setting power settings had no effect.

Inovelli Community

Red Series Dimmer flickering intermittently

Product Support

north-america

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled