For at least a couple of months, some lights have spontaneously gone from ON to OFF, returning to ON with less than 30 seconds. It’s not always the same light.
Last night I was in a position to notice one incident and capture the log (see below).
Any ideas as to what might be the cause? And my spouse wants to know as well 
I also have no idea why “P33=0 (Overheat: False)” keeps getting reported, I think I have all energy, power, and temperature reporting turned OFF.
I have 34 IB’s, most configured as dimmers, with the latest Hubitat driver. Using Hubitat for control (latest hardware and beta firmware for the hub).
dev:422025-08-26 11:31:06.711 AMtrace
Entryway Lights Main Dimmer IB TEMPERATURE_CONFIGURATION_CLUSTER (cluster:0002 data:[82, 00, 00])
dev:422025-08-26 11:30:56.458 AMwarn
Entryway Lights Main Dimmer IB Unknown Cluster:0x001F catchall: 0000 001F 00 00 0040 00 AD8B 00 00 0000 00 00 81018450140100976D28
dev:422025-08-26 11:30:56.048 AMinfo
Entryway Lights Main Dimmer IB Energy=47.71kWh
dev:422025-08-26 11:30:47.875 AMinfo
Entryway Lights Main Dimmer IB Level=254 (100%)
dev:422025-08-26 11:30:46.327 AMinfo
Entryway Lights Main Dimmer IB P33=0 (Overheat: False)
dev:422025-08-26 11:30:44.592 AMinfo
Entryway Lights Main Dimmer IB Switch=1 (on)
dev:422025-08-26 11:30:43.196 AMinfo
Entryway Lights Main Dimmer IB Level=254 (100%)
dev:422025-08-26 11:30:42.310 AMinfo
Entryway Lights Main Dimmer IB Dimming Method = Trailing Edge
dev:422025-08-26 11:30:42.309 AMinfo
Entryway Lights Main Dimmer IB P258=0 (Dimmer mode)
dev:422025-08-26 11:30:42.245 AMinfo
Entryway Lights Main Dimmer IB Switch=1 (on)