Stripped terminal screws Blue 2-in-1 mmWave

[rohan]

I’ve not done it myself, but it should be the same process. We’ve seen a few reports on the forum from other users who have done it successfully:

@gingerdude

Just wanted to call out that I have installed several of these switches and a few of them have had weak black screws that I have stripped out such that they do not tighten anymore. This is with 14G wire and normal hand snugging of the screws. Luckily the switches are easy to disassemble so I was able to steal gold or black screws from the switches I am removing to take their places, but wanted to make others aware to be very careful.

@bureau.radii

@gingerdude

Luckily the screws are a standard size and I have the tools required to swap them out so it wasn’t a big deal. I got them installed fine by supplying my own replacement screws. But good to keep in mind!

What I have been doing is moving the traveler screw when this happens as most of the time I don’t need a traveler.