It could be this issue:
I’ve been migrating my Inovelli devices from ST to the new ZwaveJS integration I am having an issue where a LZW36 is randomly turning the light off. I did not have the same problem when the light was used ST. I am using the direct integration(not mqtt). Not sure what additional logging I can enable to figure out where this is coming from except what I have indicated below. I have tried exclusion/inclusion to see if that helped but it did not.
Any help is appreciated.
Couple of things I noticed…
opened 12:47PM - 25 Mar 21 UTC
closed 11:44AM - 27 Mar 21 UTC
investigate 🔎
waiting for info ⏳
<!--
🚨🚨🚨 STOP! STOP! STOP! 🚨🚨🚨
Before opening an issue, please read and … follow these steps:
1. Are you using HomeAssistant?
Instructed by blhoward to come here.
2. Are you using ZWaveJS2MQTT?
No.
3. Check the troubleshooting section if your problem is described there:
Not listed
4. Check the changelog if your problem was already fixed recently.
Running Latest
5. Also make sure to provide the necessary information, as described here:
Understood, will proceed with logging now but do not yet have information (logging from Inovelli forum)
For HomeAssistant, this is how you do it:
Home Assistant -> settings -> Integrations -> Z-Wave JS -> Configure -> Create dump -> zip the json file and post it here.
🙏🏻🙏🏻🙏🏻 Thanks, now onto your issue:
-->
**Checklist:**
- [X ] I am **not** using HomeAssistant. **Or:** a developer has told me to come here.
- [X ] I am **not** using ZWaveJS2MQTT. **Or:** a developer has told me to come here.
- [X ] I have checked the troubleshooting section and my problem is **not** described there.
- [X ] I have read the changelog and my problem was **not** mentioned there.
**Describe the bug**
After a reliable amount of time (near 2hr 10min), Inovelli and Home Assistant users on ZJS are experiencing the "Fan" endpoint of the device turning off. This is only when controlled "ON" by Home Assistant, not when the light is physically toggled.
**Device information**
Inovelli LZW36
Node ID: 16
**Did you change anything?**
- [ ] **Yes**: *(please describe)*
- [X ] **No**
**Did this use to work before?**
- [X ] **Don't know**, this is a new device
- [ ] **No**, it never worked anywhere
- [ ] **Yes**, in: *(specify application with versions)*
**How are you using `node-zwave-js`**
- [ ] `zwavejs2mqtt` (latest) docker image
- [ ] `zwavejs2mqtt` (dev) docker image
- [ ] `zwavejs2mqtt` Manual Docker build
- `node-zwave-js` branch:
- `zwavejs2mqtt` branch:
- [ ] ioBroker.zwave2 adapter
- [X ] `HomeAssistant` version 2021.3.4
- [ ] Pkg
- [ ] Manual Docker build
- `node-zwave-js` branch:
- `zwavejs2mqtt` branch:
- [ ] `node-red-contrib-zwave-js`
- Module version (double click node):
- [ ] Manually built (as described in the [docs](https://zwave-js.github.io/node-zwave-js/#/development/installing-from-github))
- [ ] Other:
**To Reproduce**
Steps to reproduce the behavior:
1) Turn on light endpoint via HA
2) Light automatically turns off after period of time.
**Additional context**
Did not seem to be the case on earlier versions of ZJS integration into HA.
**Logfile:**
Incoming, will replace once available.
Fan turns off about 2 hrs and 10 minutes after being turned on via zwavejs. It might be a firmware bug. There appears to be a temporary config file fix in an upcoming zwavejs release.