I’m having this same situation. I have 4 Inovelli white series, some are connected to single bulb, some to multiple bulbs, etc. All of mine are single pole, and all have a neutral wire.
All of them previously worked fairly well before this week, but they seem to go “unknown” once every couple of days. (it’s like a rotating ferris wheel, one per day effectively)
A few notes:
- 1.05 software
- Installed into Google Home first, but also into Home Assistant if that’s helpful
- I have not explicitly programmed in Google Home or HAOS any of the single paddle presses, they are just in a default state of “up = on, down = off”, however, when this happens, even manual presses of the switch don’t work until I pull the air gap. I haven’t tried factory resetting just yet, but there’s no way all 4 switches are faulty.
- Other thread devices on my network are working fine, but I did have a similar problem with Nanoleaf bulbs a while back (not on these Inovelli switches), but firmware update seemed to have solved that.
I feel like there has to be something recent that has changed on this, if I’m not the only one. It’s almost like if it ever loses thread connection, it never retries again and just bricks itself until you pull the air gap.
I’m fairly new to Home Assistant, but if there is any log or anything that I can do to help troubleshoot, I’m all ears.