I have two white smart switches wired up so one is the master switch which controls the (dumb) load. The other has no load attached. I’m totally good with just turning the load on & off. I just set up two automations in home assistant to keep the two switches in sync. Easy peasy. But I’ve got a di…

[image] HA Blueprint: Matter Switch Tap Sequences General Discussion [Open your Home Assistant instance and show the blueprint import dialog with a specific blueprint pre-filled.] I’ve updated the blueprint to add light binding. The UI is also a bit more polished as well.…

I spent a couple hours today confused how to proceed with a 4-way setup (all white 2-1 smart switches) meant to be controlling a dumb load. I can follow the wiring diagram provided, but was lost beyond that. [image] What do I need to do to make each switch independently switch the load, as a trad…

Hi Nick, unfortunately, no - you are in exactly that situation you describe. Your switches happen to be powered by the same circuit, but that doesn’t get you anything. There is no way to WIRE together multiple smart switches. The intent is that they will be linked by binding (when that’s available).…

[image] NFlammang: What do I need to do to make each switch independently switch the load Since matter binding is not a feature presently supported, you should use automations to control the load switch. The multi-tap capabilities of the switches vary by hub.

White Switches: 3-way dimming

Product Support

CroVlado September 24, 2024, 10:30pm 2

This is probably your best bet right now. Matter bindings are still not a thing on any platform.