Configure LZW31 3 Way with Dumb Switch - Disable Relay doesn't work with Dumb Switch?

[Bry]

@miker2069

So what’s the best way to disable all switches in a 3 way configuration?

Unfortunately, even with the latest beta firmware, a dumb switch will override local protection disabled on an Inovelli. I don’t think that’s the case if you substitute an Aux, but someone that has tested this with the latest beta firmware should confirm. EDIT: @kreene1987 confirmed that an Aux is the solution.

Firmware v1.55 (Beta) | LZW31-SN | Dimmer - Red Series (Gen 2)

With this release I am seeing an issue in on / off mode where the physical down button does not turn the light off. Smart Bulb mode does seem to be working. I had an issue where some scenes were not reporting but after a factory reset they were. Not sure if that was a fluke or not. I did try to change some config options and change them back. 3-way in Smart Bulb mode with a dumb switch hasn’t / doesn’t work. This would require “juggling” the power output across the load and the traveler when t…