Switches Firmware Discussion
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Blue Series 2-1 Firmware Changelog | VZM31-SN
January 18, 2023 / v2.10 / 0x0102020A Note: We haven’t officially announced 2.10, but it is available on Hubitat servers for our beta testers. It may have an issue with binding when you have a master and a slave Inovell… |
|
198 | 5961 | January 30, 2023 |
|
Firmware v1.57 (Production) | LZW31-SN | Dimmer - Red Series (Gen 2)
Update: 9/23/2021 This version is now the latest production version. This is a small update that is meant to enhance the consistency of aux switches in 3-way mode when neutral is being used. Firmware Change-log: LZW31-… |
|
59 | 4100 | January 9, 2023 |
|
Firmware v1.55 (Beta) | LZW31-SN | Dimmer - Red Series (Gen 2)
This firmware has several bug fixes and further tries to optimize smart bulb mode. Please let us know any feedback! Edit: We just released 1.55 as a quick fix for the physical button not turning the device off in on / o… |
|
100 | 4681 | July 28, 2021 |
|
Firmware v1.52 (Beta) | LZW31 | Dimmer - Black Series (Gen 2)
We are releasing a beta firmware for LZW31 users as a follow up to v1.48. It has several bug fixes and enhancements. See the release notes in the link below: We have not done much internal testing on this version yet, s… |
|
16 | 1218 | May 27, 2021 |
|
Firmware v1.52 (Beta) | LZW31-SN | Dimmer - Red Series (Gen 2)
We are releasing a beta firmware for LZW31-SN users as a follow up to v1.48. It has several bug fixes and enhancements. See the release notes in the link below: We have not done much internal testing on this version yet… |
|
231 | 8688 | July 6, 2021 |
|
Firmware v1.36 (Beta) | LZW36 | Fan + Light - Red Series
We are releasing a beta firmware for the LZW36. See the link for bug fixes and enhancements. One notable addition: Parameter 51 to disable the 700ms delay from when you press the physical on/off buttons. This is similar… |
|
125 | 7408 | November 5, 2021 |
|
Firmware v1.17 (Beta) | LZW30-SN | Switch - Red Series (Gen 2)
We are releasing a beta firmware for LZW30-SN users that would like to take care of some of the bugs that they may have experienced. There is an enhancement as well for people that have interesting loads that can cause p… |
|
21 | 3478 | June 23, 2020 |
|
Firmware Update for Red Series Dimmer via Hubitat
|
|
8 | 90 | January 26, 2023 |
|
Cannot Check for OTA Updates with Zigbee2MQTT
|
|
18 | 858 | January 10, 2023 |
|
LZW30-SN not sending status updates to hub when controlled via association
|
|
30 | 1313 | January 7, 2023 |
|
Dimming duration values not sent to bound devices when switching on/off
|
|
14 | 303 | January 6, 2023 |
|
LZW31-SN | Dimmer - Red Series (Gen 2) firmware v1.61
|
|
7 | 172 | January 4, 2023 |
|
Blue Series bound to Hue defaultLevel ignored
|
|
8 | 250 | December 30, 2022 |
|
Control4 Drivers?
|
|
5 | 180 | December 18, 2022 |
|
Blue Series Firmware Feature Request
|
|
14 | 508 | December 13, 2022 |
|
Problem with Remote dimmingSpeedDown and rampRateOffToOn
|
|
9 | 178 | December 8, 2022 |
|
Plans to join Home Assistant's built-in OTA firmware update?
|
|
45 | 2007 | December 2, 2022 |
|
Blue 2-1 + zigbee2mqtt: local changes not reflected in remote state
|
|
2 | 214 | November 28, 2022 |
|
SOLVED: Blue series (VZM31-SN) zigbee group binding no longer working after upgrade to v2.05
|
|
2 | 197 | November 11, 2022 |
|
Dimming Speed and Ramp Rate (Parameter1 and Parameter3) are swapped - FIXED IN 2020-08-12 DRIVER
|
|
14 | 2487 | October 25, 2022 |
|
Open discussion: Dimming Speed and Ramp Rates (parameters 1-4) Range 0-100 but 0-3 seem to be all anybody uses?
|
|
16 | 887 | October 25, 2022 |
|
No load control after firmware upgrade
|
|
8 | 206 | October 17, 2022 |
|
Configure Delays for Red Series On/Off switches LZW-30SN
|
|
5 | 474 | September 26, 2022 |
|
Red Series Dimmer - 4 Way: Lights turn on and then off immediately
|
|
3 | 190 | July 21, 2022 |
|
Firmware changelog
|
|
10 | 522 | July 11, 2022 |
|
Hubitat driver not updating state for firmware 1.57/1.45
|
|
11 | 353 | July 8, 2022 |
|
Black Series Switch Scene Control
|
|
6 | 239 | June 23, 2022 |
|
LZW31-SN "Please wake your sleepy device" hubitat
|
|
19 | 1192 | June 10, 2022 |
|
Flashed Firmware Twice and Still Unable to Change Configuration for LZW31-SN
|
|
2 | 251 | May 25, 2022 |
|
LZW31-SN stopped sending scene / status events to hubitat after firmware upgrade
|
|
17 | 344 | April 30, 2022 |