I’ve installed a few Blues on smart bulb mode controlling some Philips Hue bulbs. I have some Hue bulbs that are bound directly to the switch, and some that are controlled instead using automations in Home Assistant (Blue > ZHA > Philips Hue Integration (for bulbs on Hue hub) > Bulb). I can’t make …

In a very similar situation trying to get dimming working through HA rather than via direct binding. The other benefit of direct binding is supposed to be speed and reliability (no wifi still works). Are you finding a difference on these at all?

I’m not sure exactly how the hue dynamic scenes work, but when you say it cycles through various predefined colors there’s a blueprint in HA for doing exactly that. https://gist.github.com/mdolnik/7147b5df4b08f7979afad02a5dd137a2 color_loop.yaml blueprint: name: Color Loop descript…

I use my Blue switches through HA (instead of direct bonding) and can’t figure out how to get Dimming to work either. If anyone figures this out please post the solution to this thread or link to the solution.

Did you figure this out? I’m curious about going this route instead of direct binding.

Has anyone tried using light templates? Template Light - Home Assistant I actually have something like this now for a switch that cuts power to the hue bulbs (that go through the hue bridge), and do some complicated stuff to only dim 50% power (but multiple that by 2x when sent through the hub int…

I’m interested in this as well and the light template approach seems like a natural solution to the problem. Would love to hear whether it actually works well and supports dimming by holding down the paddle switch, before I spend a bunch of money! :slight_smile:

I’m mostly posting to see if anyone has updates on their setup between Hass, Inovelli, and Hue. Here’s my setup: Every room in the house has a Zigbee Inovelli light switch, and most rooms have some Zigbee hue bulbs. For me, priority number 1 is that the light switches always show the state of the …

[image] drake.bridgewater: Adaptive Lighting [image] Adaptive Lightning Settings General Discussion It took me a while to figure out what to change to get the Adaptive Lightning add-on for Home Assistant to work with my Blue 2-1. It actually wasn’t much that needed …

Dimming with Blue Series 2-1 / Philips Hue on Hub / Home Assistant

Product Support Hardware & Firmware Help

Bry May 23, 2024, 2:48pm 9