|
Firmware v2.31 (Beta) | LZW42 | RGBW Bulb
This update is mostly for SmartThings users that have not been able to associate their switches with the LZW42 because SmartThings does not fall back to S0 if it fails S2 like it used to. This change adds the following f…
|
|
46
|
5137
|
November 30, 2025
|
|
[TIP] Getting RGBW Bulb LZW42 Working in Vera
After including the bulb into your z-wave network, please proceed with the following steps:
Click on the arrow next to the device in the “Devices” screen.
Then click on the “Advanced” link to edit the devices advanc…
|
|
6
|
2057
|
January 23, 2021
|
|
[DEVICE PAGE] Inovelli 4-in-1 motion sensor LZW60
This is our new 4-in-1 sensor. It provides some great features at an affordable price! Here is our website link to the device:
https://inovelli.com/shop/smart-sensors/z-wave-4-in-1-sensor/
Light: Save energy by making…
|
|
340
|
27735
|
September 17, 2024
|
|
Mixing Red and Blue on a single 3 way circuit
|
|
4
|
43
|
October 13, 2026
|
|
VZM32-SN mmWave occupancy gets stuck on (won't clear) despite that zone occupancy continues updating
|
|
5
|
115
|
October 11, 2026
|
|
VZW31-SN / v2.03 doesn't show brightness on LED when the paddle is held and the dimmer is already at the end
|
|
0
|
33
|
October 10, 2026
|
|
VTM30-SN, VTM31-SN Becoming Unresponsive
|
|
8
|
188
|
October 6, 2026
|
|
Aux switches will turn lights off, but not on
|
|
8
|
98
|
October 4, 2026
|
|
VZM32-SN mmWave XY tracking mirrors position and creates duplicate targets
|
|
2
|
57
|
September 30, 2026
|
|
Confirmed Thread channel congestion across 12x VTM31-SN — CCA failure data (14-115%)
|
|
0
|
65
|
September 22, 2026
|
|
Switches not working on backup power
|
|
31
|
634
|
September 21, 2026
|
|
mmWave zone occupancy not matching coordinates of reported target
|
|
1
|
85
|
September 20, 2026
|
|
Blue Dimmer - EP3 / Fan Control Mode?
|
|
2
|
82
|
September 17, 2026
|
|
Zigbee Motion Switch • Project Linus • Bug & Enhancement Thread
|
|
309
|
10008
|
September 16, 2026
|
|
LZW31 with aux and neutral - aux can turn off, but not on
|
|
2
|
72
|
September 14, 2026
|
|
VTM30-SN Firmware: 1.0.4r3 timer
|
|
14
|
521
|
September 6, 2026
|
|
Z-Wave Motion Switch • Project Linus • Bug & Enhancement Thread
|
|
113
|
3086
|
September 2, 2026
|
|
Blue Dimmer w/ mm Sensor Down Button Multi-tap not working with Homey Pro
|
|
0
|
31
|
September 1, 2026
|
|
Red dimmer 2.x beta: Broken dumb multi-way detection - LED bar stuck on with up paddle dead | VZW31-SN
|
|
0
|
43
|
September 1, 2026
|
|
White Series Fan Switch cannot set load indicator timeout
|
|
5
|
76
|
August 27, 2026
|
|
Recently purchased Inovelli Blue Series Switches (3) and Canopy Modules (2) constantly dropping from Zigbee Network
|
|
2
|
116
|
August 26, 2026
|
|
Z-Wave On/Off Switch • Project Pulsar • Bug & Enhancement Thread
|
|
13
|
400
|
August 23, 2026
|
|
Updated VZM32-SN Zigbee Binding guide for HA 2026.8/ZHA?
|
|
0
|
85
|
August 21, 2026
|
|
White Dimmer Binding and Local Control
|
|
21
|
499
|
August 20, 2026
|
|
Unable to flash firmware using Home Assistant Z-Wave JS using otz file
|
|
1
|
46
|
October 13, 2026
|
|
LZW36 Fan/light switch unresponsive
|
|
2
|
81
|
October 5, 2026
|
|
Problem upgrading Blue 2-1 firmware
|
|
19
|
1893
|
August 1, 2026
|
|
Unable to get new mmwave dimmer to enter pairing mode even after multiple factory resets
|
|
1
|
37
|
September 21, 2026
|
|
Red Series Dimmer (VZW31-SN) unexpected dimming speed behavior
|
|
12
|
192
|
July 12, 2026
|
|
Terrible day 1 experience with Red On/Off switches for bathroom fans
|
|
4
|
247
|
September 9, 2026
|