Inovelli 2026: Q3 Update!

Inovelli 2026 – Q3 Update

Hey everyone,

As mentioned in our 2026 roadmap post, we will continue sharing quarterly updates to give a high-level view of what we have been working on, where things stand, and what is coming next.

This post is meant to complement the individual project threads by highlighting key progress across products, firmware, and some of the larger projects happening behind the scenes.

Product & Project Updates

Red Series Fan Switch (Project Momentum • Z-Wave Fan Switch • Red Series)

Q3 was an exciting quarter for new product announcements, and one of the newest projects joining our roadmap is the Red Series Fan Switch, also known as Project Momentum.

Project Momentum will bring a dedicated Z-Wave fan switch to the Red Series lineup, helping round out the Red Series with an option similar to our existing Blue Series Fan Switch.

Development is now underway, and the individual project thread will be the best place to follow progress and provide feedback along the way.

Red Series Fan/Light Canopy Module (Project Cheryl • Z-Wave Fan/Light Canopy Module • Red Series)

We also officially announced Project Cheryl, our upcoming Red Series Fan/Light Canopy Module.

This will bring a Z-Wave option to the canopy module lineup and provide independent fan and light control for compatible fixtures.

As with our other projects, we will continue sharing more detailed development updates in the individual project thread.

White Series mmWave Dimmer (Project Linus • Matter/Thread mmWave Dimmer • White Series)

We know this one has been highly anticipated.

Project Linus will bring our mmWave presence sensing technology to the White Series with a Matter over Thread mmWave Dimmer.

This gives us the opportunity to bring many of the features found in our existing mmWave products to the Matter/Thread ecosystem, and we are excited to have development officially underway.

Button Controller (Blue Series / Red Series)

Development on the Button Controller, also known as Project Walt, is officially moving again.

As we mentioned in Q2, engineering resources had temporarily shifted toward some of our larger B2B projects. With that work progressing, we have been able to resume development on the Button Controller.

One of the biggest areas we have been working through is the paddle design. Our original goal was to create a more modular approach with interchangeable button configurations, but during development we ran into challenges with light leakage between the individual button areas.

After reviewing the design and manufacturing options, we determined that continuing down that path would add too much complexity and make it more difficult to achieve the fit and finish we want.

Instead, we are moving forward with multiple dedicated paddle designs. This gives us much better control over the appearance, labeling, light diffusion, and overall quality of each configuration while still giving customers several options to choose from.

We are currently working through those paddle designs with the manufacturer and expect to review physical samples as the next step. Engraving and final labeling are also still being worked through.

We know this project has been a long road, and we appreciate everyone who has continued following along, sharing ideas, and providing feedback throughout the process.

Zigbee Wall Outlet (Project Jambry • Zigbee Wall Outlet)

Project Jambry has also resumed after being temporarily paused.

This brings the Zigbee Wall Outlet back into active development alongside the other products currently on our roadmap.

We will share more detailed updates in the individual project thread as development continues.

European Switch (Project Europa • Zigbee + Thread/Matter Smart Dimmer • Blue & White Series)

Project Europa is moving again as well.

Our next step is to receive the latest samples and review them internally. Once those arrive, we will be able to get a better idea of where things stand and what changes, if any, still need to be made.

We are hopeful that we will have more information to share soon.

Metal Switch Line (Project Alloy)

Project Alloy continues to be one of the largest projects we are working on behind the scenes.

This month, members of the Inovelli team will be traveling to help install, test, and review the switches as part of a full home installation with our B2B partner. This will give us the opportunity to see the products operating together in a real-world environment and gather feedback from the installation process.

We can also finally share a little more about what Project Alloy actually is.

Project Alloy will be a full lineup of metal switches, including both smart and traditional/dumb switches.

While this project originally started as part of a major B2B opportunity, our plan is also to make the lineup available for purchase directly through Inovelli.

The goal is to create a premium switch lineup with a distinct metal design and a consistent look throughout the home, regardless of whether a particular location needs a smart or traditional switch.

We still cannot share photos just yet, but we are getting closer. As soon as we are able to show them publicly, we will.

Exploring an Inovelli Wallplate

Another idea we have started exploring is designing our own wallplate.

There are a lot of different directions we could take this, and this is an area where we would really like input from the community before getting too far into the design process.

What wallplates are you currently using that you really like?

Are there certain materials, shapes, screwless designs, edge profiles, finishes, installation methods, or other details that you think make a wallplate better?

If Inovelli were to create one, what would you want us to do differently?

Let us know. We would love to hear your ideas.

Firmware Updates

Q3 included firmware work across the Red, White, and Blue Series product lines.

The primary focus this quarter was on responsiveness, binding reliability, mmWave stability, network performance, and LED/dimming improvements.

Blue Series mmWave Dimmer (VZM32-SN)

Recent updates focused on:

  • Improved mmWave stability and reliability

  • Fixed LED notification issues

  • Improved LED color accuracy at lower brightness levels

Red Series Dimmer (VZW31-SN)

Recent updates focused on:

  • Improved dumb and auxiliary switch detection and configuration

  • Improved button responsiveness

  • Fixed dimming duration issues

  • Improved LED behavior at lower brightness levels

White Series Dimmer (VTM31-SN)

Recent updates included:

  • Added configurable minimum and maximum dimming levels

  • Added group binding support

  • Added additional remote and binding options

  • Improved button responsiveness

  • Improved LED performance

  • Fixed binding table reliability issues

White Series Fan Switch (VTM35-SN)

Recent updates included:

  • Added group binding support

  • Improved button responsiveness

  • Fixed binding table reliability issues

  • Various Matter endpoint and UI/label improvements

White Series On/Off Switch (VTM30-SN)

Recent updates included:

  • Added group binding support

  • Improved button responsiveness

  • Fixed binding table reliability issues

  • Fixed LED color issues

  • Fixed level reporting issues

Red Series mmWave Dimmer (VZW32-SN)

Recent updates focused on:

  • Improved communication between the mmWave and Z-Wave portions of the switch

  • Improved network reconnection behavior

  • Reduced unnecessary network traffic

  • Improved energy metering

  • Fixed configuration and parameter-related issues

Firmware continues to be an ongoing focus for us, and community reports remain an important part of identifying edge cases and areas where we can continue improving.

Looking Ahead to Q4

Heading into Q4, there is a lot happening across the roadmap.

Our focus includes:

  • Continuing development on the Red Series Fan Switch, Red Series Fan/Light Canopy Module, and White Series mmWave Dimmer

  • Continuing work on the Button Controller and reviewing the next paddle samples

  • Moving the Zigbee Wall Outlet forward again

  • Reviewing the next European Switch samples

  • Completing the Project Alloy full-home installation and gathering real-world feedback

  • Continuing firmware and stability improvements across the product lineup

  • Exploring an Inovelli wallplate with feedback from the community

There are several projects moving at the same time right now, and we are excited to be able to share more of them publicly.

We Want Your Input

As always, your feedback plays a big role in shaping what we do next.

In particular, we would love to hear your thoughts on the wallplate idea, the newly announced projects, and anything else you would like to see us prioritize as we head into the final quarter of 2026.

We appreciate everyone who continues to test firmware, participate in the project threads, share ideas, report issues, and help shape these products throughout development.

Thanks again for being part of the Inovelli community.

-The Inovelli Team

11 Likes

I tried Lutron wall plates, and also Leviton. I ended up not liking the flat edge, and the seam in the Lutron. The Leviton looked a bit more like traditional plates with no visible seams. Like the Leviton, b I g able to adjust all the screws at once makes it much easier to get multi gang switches to align, and is a great place to stick the QR code stickers so no screws are needed to see them later. Then just snap the cover on and it’s all hidden. I’m trying to think of any feature I’d want added to a wall plates, but the only addition I can even think of is a dedicated space/outline/recess (sized for the for the extra QR code stickers that are in the box) that is hidden when fully installed, but easy access.

1 Like

Honestly, wall plates are almost literally a dime a dozen. I got a bunch of no name ones at Lowes and they’ve been fine. I know Inovelli is a premium brand, but I really wonder how many people will pay a premium for a piece of inert plastic. I guess what I’m saying is that wall plates would be fine when you’re bored and have nothing else to do, but I wouldn’t want anything on the list delayed for them.

I’ve very excited that the Zigbee outlet is back in development.

7 Likes

Another vote for not really being motivated to purchase wall plates. We have ~40 wall plates of different gangs (mostly 2-gang), and if they’re going to be priced anything like the Lutron ones, where it seems to be $5/gang, that’s way too much money to spend on wall plates. And that’s only counting switches, there’s ~60 outlets (many of which are in visible locations). I don’t even think I could justify them if there were like $1/gang (not that it would be profitable for y’all at that point, anyway).

If you’re taking requests, I’d like for y’all to fill some more gaps in the ecosystem:

  • I’d be over the moon if y’all made Zigbee surface mount 6" lights. Think https://www.acuitybrands.com/products/detail/1835292/juno/jsbtc-tapered-smart-surface-mount-disk-light/6-slimbasicst-jsbtc-smart-disk-light, but with firmware that actually keeps them on the network. There’s ~40 of surface mount lights in the current house, and I’d replace them all with Zigbee ones if any of them even existed. Color lights would be great, but I’d be okay with just white warmth. The only alternative seems to be retrofitting recessed lights, and that’s not in the cards. See also Integrating Zigbee Canless Lights For Entire Home - Juno Connect for folks that would likely also buy these.
  • Decora-style Zigbee remotes are nearly impossible to find. The few that do exist either are bulky (so they stick out too much), or don’t bind to devices (have to go through the coordinator). Round or oblong remotes look out of place next to a normal shaped switch. Bonus points if it can do not just light clusters, but also window covering clusters.
  • Zigbee power strips seem to be knock-offs of some old Tuya model that doesn’t have power monitoring and only 4 outlets. Give me 6 outlets and power monitoring at a decent price and I’ll buy 10-20 of them (small fries, I know, but It’s one house).
  • Zigbee horizontal blind retrofit kits are rooster’s teeth. Think https://myiblinds.com/, but Zigbee. I’ve finally found something that seems like it could work, but they’re extraordinarily expensive, and hard to source (not mentioning what they are because they’re so hard to source).
  • Really anything that Aqara/Sonoff/ThirdReality/Tuya make that isn’t so closed off. I’d gladly trade in every one of those devices for Inovelli if they had the amount of configuration the switches have. Like these night lights are decent: Multi-Function Night Light – ThirdReality, but if you could control things like: how long the light stays on, different manual/automatic logic, etc; I’d be all over them. Many of these things aren’t restricted by form factor, so you probably wouldn’t be constrained by space quite as much as y’all are with the switches.

Wall Plate

My favorite is the EATON PJS262W as match the white of smart switches well, are screwless, and have a backplate that helps install the switches straight. I typically loosely screw the switches in place, then install the backplate, then tighten the screws on the switches while making adjustments for everything to be straight. I have not found a better wall plate in a couple decades (these were branded Cooper Wiring a while back so the example I am showing has that branding on them).

The only downside is that the sticker on the switch is covered, but awesome Inovelli provides extra stickers so one could apply them on the backplate if desired.

https://www.eaton.com/us/en-us/skuPage.PJS262W.html

https://www.lowes.com/pd/Eaton-2-Gang-White-Double-Midsize-Wall-Plate/1001591420

ZigBee Outlet

  • Hopefully by starting with Zigbee means Inovelli will release a Thread version soon after. I have 80+ Zwave and 80+ Zigbee devices so I have been using Red Series for all my 32 light switches, and Blue series for all my 11 fan controllers. Given the frequency delta they don’t interfere, and this enabled me to build a strong mesh for both protocols in the entire house. I now have the issue of doing the same with Thread and given I tore out all the Jasco zwave and zigbee outlets (way too many issues), I have lots of places I can use Thread outlets…

  • Configurable Power / Energy monitoring is a must

  • Avoid adding USB ports on the outlet as the charging standards keep evolving and the user will have to switch over to a plug in USB charger anyway (or keep replacing the outlets if Inovelli chases the standards). In a house packed with electronics, I struggle to see the benefit of those outlets. I have 3 installed (TopGreener TU215PD60AC-W 65W GaN - unknown brand but UL approved - 2 in bathrooms, and 1 in the kitchen) simply to declutter (and for device always there), and in those locations I have zero need for a smart outlet.

  • Smooth tamper mechanism. I am using commercial EATON TR6252W-BX-LW (Commercial version) because they are safer, and way more robust than the residential ones but the tamper mechanism is really tough (maybe loosens with time?)

  • NO PIG TAILS! I hate those and avoid all products that have them. Boxes are crammed and they just add to the mess. I love the clamp mechanism you use on your existing products, but I have had a few screws strip… so stronger metal would be great.

  • Low profile due to overfilled boxes would be great.

  • 1 relay - I rarely need more than one switched outlet, and when I do I have plenty of alternative solutions. Keeping cost lower, and size smaller is preferable to catering to a less common need.

  • Customizable LED - color and intensity, including a fully off option as at night, it is amazing how visible they are. On all my 10+ old Jasco outlets I had disabled the LED.

  • Button you can press even if something is plugged in. Some have tiny buttons, or they are covered in part by the plugs. The need to press them is rare but when I did need to, I had to unplug everything every time. Typically this was to restore connectivity (they had issues…) so I doubt I’d ever need to press the buttons on Inovelli outlets :wink:

  • Temperature sensor for safety not just for the device. One of the indications of issues in an outlet is over heating caused by excessive current often paired with loose connections. I use a thermal camera to scan for these issues but that has become harder now that smart switches generate their own heat. Maybe an embedded sensor detecting an abnormal temperature rise could help?

  • Overcurrent auto off? I would generally use automation to handle this, but an on device protection might be more fool proof having fewer dependencies.

  • Repeater options? Turn it into a more configurable router node so one can install them as a mesh backbone even if the switched outlet is not really needed. This is better than plug in outlets that can be removed causing mesh issues. “Zigbee Map” (awesome tool for Home Assistant) often reports my Inovelli fan controllers for low quality routes. Most of the red lines in the map below are between VZM35-SN and the rest of the mesh. Maybe I don’t fully understand the mechanics of the Zigbee mesh, but having a way to tell the router to not bother with links below as certain signal level might weed these out. My VZM35s are just too friendly and inclusive :wink:

From my perspective, the draw of Inovelli products is that they are providing an alternative to Lutron Caséta and RadioRA3 with more features (mmWave, config/aux button, fully configurable vs Caséta) using standard integrations (Z-wave & Zigbee, I care less about Matter but some do!) at a lower price point. For the last few months I’ve been comparing the Inovelli mmWave dimmer to the Diva and Sunnata at my home and the stand-out feature that sets Inovelli apart is the mmWave sensor, with the aux button as a side-bonus for scene control.

The Inovelli mmWave switch is the only dimmer on the market that adds presence-sensing to the aesthetic of a standard dimmer paddle switch. I firmly believe Inovelli has the potential to rival Lutron for dimmer switches with this tech, or by meeting feature parity at a lower price point, but to meet that goal product design should move toward polishing the current product lines with careful attention to new products where room for innovation exists to set the Inovelli product apart. Convincing my wife to go Inovelli rather than Lutron for our home remodel is a hurdle not because of cost, but the experience of interacting with the switch. Seamless presence-sensing is a killer feature, but Lutron have the upper-hand for physical interactions:

In comparison with the Lutron designs, the Inovelli dimmer switch is louder (e.g. worse for bedrooms), there is relatively huge amount of play on the paddle before triggering the switch, the tactile feedback is less pleasing (overly clicky), the edges of the paddle are too sharp, the lowest LED brightness level is still a little too bright for a perfectly dark room, and when the LED bar is viewed head-on individual LEDs are clearly visible (most noticeable when slightly to the left of the bar, happy to provide pics). These (somewhat subjective) shortcomings lead to a product experience that feels less polished/reliable.

Ideas for moving the current product lines to the next level:

  1. Optimizing the functionality and aesthetic of the plastic paddle (less play, rounder edges, improved LED lightbar diffusion).
  2. Consider using alternative buttons, or design paddle versions that allow for a customizable experience (perhaps with a rubber insert?).
  3. Upgrade the LED bar with dedicated white LEDs to allow the same fidelity of color creation as the fancy smart bulbs these switches power.
  4. Consider increasing the number of LEDs from 7 to closer to the 20 used by Sunnata (pretty sure that’s the number…)

I love the mmWave I have and look forward to installing more.

I like the look of the screw less snap on wall plate designs, but I’d love to see ones that still expose the QR code on the switches, so if I need to reset, re-pair, or whatever, I can just snap the flat wall plate off, and not have to unscrew it.

I also like the slightly oversized plates, so that it covers the imperfections of the builder, especially after things shift and settle in the house.

As a newer customer, I just have to say that I love the renewed development focus. Just installed 5x mmWave dimmers, 2x regular dimmers and an on/off switch.

Having a mix of Lutron and Leviton plates, I definitely like the look of the Lutron ones.

My biggest pain point with your switches I think is the size - I get you’re doing a lot so there needs to be some heft to these devices, but they are a bit chunky unfortunately and I’ve had to get real creative with wire routing to cram em in there. A thinner profile would be amazing on new devices although I realize that’s probably new tooling as well so maybe not financially viable.

One thing I saw someone ask for in the forum is an aux switch with a light bar synced to the main switch/dimmer. It would help unify the look across devices even though it isn’t very functional

I think Inovelli has responded to that before. By the time you add everything needed for a light bar, you are 95% of the way to a standalone dimmer switch, and the cost would be the same. If you want light bars, you’ll have to get a full switch.

2 Likes

Ah I didn’t realize the cost. And that’s fair, but as I understand it the switches can’t be wired together using a traveler like a normal 3-way switch so you’re left with Zigbee binding only to tie them together. Wish the traveler could be used between em

I love the renewed focus on the Zigbee Controller and Outlet. These are very high on my interest list!

The wall plate wouldn’t personally appeal to me, I can see why it would be of interest to many though. The Caseta switches include the very nice screwless wall plates. My problem with them (which is a good for business TBH) is that I want them all to match across the house. I’ve found that these Legrand plates match the Inovelli colors very well and they also match the outlet covers in my house… my OCD wouldn’t allow them to be different. For a new build where I’m already installing many different wallplates, I could maybe be convinced to use yours if you had them but I wouldn’t replace them across my house.

1 Like