Bry
November 2, 2021, 12:27am
4
This was discussed to some extent in this thread, although not as granular as you are seeking. The Inovelli response was the switch and dimmer draw between .5 and 1W.
The specs for the MCU (Z-Wave) & Holtek, LEDs, etc. on the switch and dimmer should draw about .5w - 1w when the load is off (closer to .5 from my experience). I have requested that the manufacturer look into improving the accuracy of the KwH reporting.
Edit: Oh, and the devices report 0w usage when off as to not confuse the user. We did have a firmware version that came out where 1w was reported (rounded up), but I think I remember a lot of people being confused. Another option is to not repor…