Red and Ilumin lag in Hubitat

[harjms]

@BranDot - I used this one that @anon14959390 refers to:

Just added RGBW bulb gets a little sluggish

@Geo Yeah we are using Hubitat. @harjms I am going to update the bulb firmware this weekend and try it on SmartThings too. See if that helps it work better too. I upgraded the firmware of the LZW42 to version 2.3 using the Hubitat Firmware tool. Note: It is taking about 30 minutes a bulb on average but the bulbs are at least 30 ft from the hub through a concrete floor. I then used this driver here (https://raw.githubusercontent.com/djdizzyd/hubitat/master/Drivers/inovelli/inovelli-bulb-mul…