I’m having the same issue and am not able to figure out how to setup 3-way in the same setup OP has. The documentation clearly states that both switches need to be in Smart mode if you have 2 Smart Switches controlling the same load. However, as with OP only when I set my switch that is directly con…

I guess I’m confused how I would setup at all then. Leaving HA out of it…what is the correct setup for a pair of White Switches that need to control a single dumb load? I’m not clear that Switch 1 (not connected to the load) could be anything except Smart Mode, otherwise when you turn switch 1 off,…

Aww that maybe my issue then. Your comment made me re-look at the wiring guide. So 2 smart switches together for controlling 1 dumb load should NO LONGER use the traveler line. I didn’t notice that. So if I disconnect the traveler line what is the correct setup of the switches though before I worry …

[image] ethandlowry: Aww that maybe my issue then. Yeah, sorry. I hit enter too soon! Load switch, single pole, on-off or dimmer. Other switch, just powered with a hot and neutral. You can’t leave a hub out of the equation, however. The other switch is a scene controller only. If you us…

The challenge you will encounter when using the first Smart Switch (without load) is that, there is no way to initiate grouping/associations at the matter level yet, because it cannot be set via a hub. Innovelli has included this feature in their firmware, but currently, no hubs support it. If you…

Yeah…after more digging last night I realized that while the documentation makes it seem like this is already supported without needing a hub, the reality is it’s not supported on the hardware level and requires a hub to make it work. I was unable to find anything in HA that would allow me to bind t…

I asked on the HA Community Board. Development is working on it, but no ETA at all :frowning: [image] Multiple Matter/Thread Dimmers should control one load Configuration Matter/Thread …

[image] ethandlowry: the reality is it’s not supported on the hardware level and requires a hub to make it work. I was unable to find anything in HA that would allow me to bind these together and setup a 3-way. I understand these are brand new switches but it’s frustrating the documentation make…

Would Inovelli make the detailed documentation accessible how to manipulate the Cluster attributes to setup a binding ? If those (and ACL changes on the nodes) are documented (maybe with example payloads), we could use the Matter Server (HA) API to push those payloads via script…

Thank you Peter for linking that other thread. I will follow that as well. My workaround (I think) is I’ll setup an automation so that when my switch in the 3-way, that provides power to switch 2 and isn’t connected to load, is turned “on” it will also set the switch connected to the load to “on” as…

I guess i should clarify what I meant when I said, “supported on the hardware level”. Probably would have made more sense to say, “supported out of the box”. The documentation makes it sound like multiway is supported right out of the box, without the need of a hub or further intervention. It has gu…

Virtual 3-way White Series

Product Support Hardware & Firmware Help

peter.kozak August 12, 2024, 6:46pm 10

I asked on the HA Community Board. Development is working on it, but no ETA at all

Requesting the community's opinion (please)- white series matter over thread dimmer switch OR blue series zigbee dimmer switch?