Z-Wave Motion Switch • Project Linus • Bug & Enhancement Thread

[rohan]

@UngluedChalice is correct. You’ll have to use Aux switches or smart switches as the other switches for 3/4/n way use.

@rohan

You are correct. The original PRD called for dumb switch support to be included (like the normal dimmers). Unfortunately that had to be dropped during development due to lack of space on the circuit board (mmwave hardware takes up a significant amount of space).

These dimmers cannot function at all with dumb switches since the relay and other hardware needed to handle that is not present. You’ll have to use Aux switches instead.