This will be a thread for listing out any bugs you may find and/or any enhancements you’d like to see for the Blue Series mmWave Switch (VZM32-SN). This is not a thread for troubleshooting personal problems – please create a new thread so we can properly help.

Can you DM me (or use chat) some screenshots of before and after?

BUG: These switches seem to interfere with each other when multiple are installed in the same box as per this thread: Inconsistent mmWave sensing

It’d be nice be able to set the automatic on/off to a particular zone(s). Could be in that setting’s drop down or as binary switch per zone. Use case is I have 2 switches in my kitchen and due to the layout and sight lines I need two switches. One is playing double duty with some accent lights. Wo…

I’m noticing several “Invalid Size ‘4’” warnings in the logs when I do a configure all. Trace logging shows they are in response to the following: Erika’s Bedroom Overhead setParameter(84, 0, 4) Erika’s Bedroom Overhead setParameter(99, 0, 4) Erika’s Bedroom Overhead setParameter(94, 0, 4) Erik…

Here’s another good one for you. Setting parameters 95 and 96 results in the LED 1 being different from the others. Testing on VZM31 works fine. Examples setting all color to yellow. Here’s the hubitat RM rule: [image] and the result on a VZM31 blue dimmer: [image] and the result on the VZ…

For anyone using HASS, I’ve made a fork of nickduvall921 ’s awesome mmwave_vis app with a bunch of QoL fixes (I made this for my own purposes, not intending to overhaul the whole thing :sweat_smile: ). I wanted something that could help me work with all (or most) of the configs in one place, with fut…

This is fantastic work! Thank you!

Echoing the previous sentiment: this is awesome. Thank you! I’ve been having issues configuring my presence detection in the living room and this helps massively. Sadly, even with the help of this I’m feeling like getting this working well in my living room is a lost cause. My switch faces a large…

Try a combo of sensors and a variable. You could use the sensor to set presence on normally, but as a variable, then add in a pressure sensor where the SO sits. Have the presence variable only clear after 5 min of no presence from the mmw or the pressure sensor. You can also do this for rooms with …

[image] nerdo: about 15.5 ft away The sensor is configurable up to 6 meters, but in practice ~5 meters is the limit of how far away it can reliably track something. 15.5’ = ~4.7 m, so you’re pretty close to the limit. @cfoos1 is absolutely correct though - for large rooms like this, you need…

Inovelli Community

Zigbee Motion Switch • Project Linus • Bug & Enhancement Thread

Product Support Hardware & Firmware Help