I finally received and installed my blue series over the weekend and things are running smoothly. It is now time to configure some automations based on taps. However, I am missing the the tap actions (down_single, etc) in Home-Assistant from zigbee2mqtt. I see the topic and value under zigbee2mqtt …

I also do not have the action entity. There’s a blueprint out there that requires it. This is something commonly seen on Ikea buttons, and from what I gather from the blueprint thread there are some that are getting this with the 2-1 as well. That said, as mentioned above, just select device as tri…

[zigbee2mqtt] Blue Series 2-1 missing action sensor in Home-Assistant

Switches General Discussion

rohan August 30, 2023, 1:54am 15

You can try running my blueprint and see if that works. It doesn’t depend on the device actions.

Trigger: Unknown trigger (after extended power outage); can't get them to appear

Inovelli Blue 2-1 switch losing triggers in HA when zigbee is rebooted

Blue Series Zigbee2MQTT Double Tap missing

Blue Series 2-1 Firmware Changelog | VZM31-SN

ZHA not finding new devices

Inovelli Blue - how to access the 'hold' action