rohan
April 2, 2026, 6:00pm
5
@EricM_Inovelli could this be similar to the problem with White Series dimmers where a new firmware option was added to adjust the sensitivity of dumb switch detection.
V1.1.6r1 (beta) - March 26, 2026
Added a quick configuration button combo:
When Switch Type is Aux: Cycle through “Aux Test” — Hold Up + Tap Config 9x = Yellow
When Switch Type is Dumb: Cycle through “Dumb Test” — Hold Up + Tap Config 9x = Purple
Added EP32 Mode Select (Dumb Test)
Reduced the debounce count for button recognition
Fixed some cases where the switch would exit all fabric without factory reset
V1.1.5 (production) - February 13, 2026
Note: Please review this article before updat…