Has anyone figured out how to control the LED bar for the Blue series 2-in-1 in Home Assistant? When The provided effect “Issue effect for all LEDs” gives an error when run. Example: type: issue_all_led_effect domain: zha device_id: 74b084a17a08b36f0105f0d5521564e6 color: 0 level: …

Whoops I had a mistake on vendor ID. Also it’s not formatted properly. [image] The args are the effect properties… I can try to find in the handler. Edit: also here is the issue cluster command documentation: Zigbee Home Automation - Home Assistant

@chack , can this be done for Zigbee groups as well in ZHA? I got the solution working for an individual switch, but I can’t seem to get it working for a Zigbee group. service: zha.issue_zigbee_group_command data: group: 4 # My group id cluster_id: 64561 # Not sure where …

I haven’t tried a group so let me know! For led#7 you’ll want to use 6 as the range is 0-6 :slight_smile:

Anyone got this working for multiple switches? I can get an individual switch to work but when having multiple switches in a script only the first one in the script will run. I’m assuming the time out error message is causing it?

@huynh.kong , I’m having the same issue. Timeout breaks the script. Is the timeout a known issue? @chack , you had mentioned it might be fixed in a later firmware update? Is there a way for us to track that?

It should be in the next firmware release, but I can’t speak to the timeline for release. I’ll just tag @EricM_Inovelli to speak to that :slight_smile:

I did not see this in the firmware notes, but I believe it may be fixed in v2.05. Keep an eye here: [image] Blue Series 2-1 Firmware Changelog | VZM31-SN Firmware Discussion Current update instructions for popular hubs: Home Assistant (ZHA) Zigbee2MQTT Hubitat April 2…

Looks like it’s fixed. Updating a couple of switches now, and I’m no longer getting a timeout on one of the switches!

Guys, use the device actions in your automations… much cleaner than the service: [image]

As of the time of my post, the device action was not working to change led color. I just posted the yaml of the action because it is easier to see the whole picture

I am using 2.07 and ZHA on home assistant and the device action is still not working (gives an error) for all LED’s or for single LED’s. The cluster command does work. Is it working for anyone else on ZHA?

Changing LED bar for notifications in HomeAssistant

I did not see this in the firmware notes, but I believe it may be fixed in v2.05. Keep an eye here: