Has anyone tried dying their paddles? I’ve been stalking the store since October waiting for Blue Series 2-1 and Aux color paddles. There hasn’t been any noise I can find on the forums. I’m looking for the brown and black so I can start my install, and Im growing impatient. I found instructions onl…

[image] angryllama: There hasn’t been any noise I can find on the forums. [image] Blue Series Switch Paddle Colors General Discussion Oops, sorry for the delay here. The manufacturer has had an issue trying to match light almond, almond and ivory and we should be ge…

saw a guy on youtube who dyed dewalt tools from yellow to black. it took very well and penetrated deep guess you can ask him the technique [what kind of idiot dye their tools?!]

Well you must be good luck because I just got color samples today for the remaining colors (Almond, Light Almond, and Ivory) and they are PERFECT. I never thought the day would come, but here we are. The picture does not do it any justice at all and I tried so many different pictures and they all t…

I ordered a bunch of the red series covers and just used the blue series air gap while not 100% prefect, 99% good enough. Except the air gaps are all white. any chance you are getting just air gaps in so I can make the color match, without buying the whole blue series cover? (2 Black, 12 Gray)

I had asked about this because we also have a lot of Gen 2 paddles left over that I was hoping to repurpose, but the manufacturer wasn’t too keen on this idea because the quantity would be so low. I can ask again to see if we can do a one time exception, but unfortunately I’m not holding my breath …

Great news Eric. I’m looking forward to this. I had considered getting the Gen 2 paddles, but that wouldn’t satisfy the White Series Aux switches. So, this is very timely. I’ll make sure to throw some comments in Blue Series Fan/Light and the 5 Button scene controller to get those rolling :wink:

DIY paddle dyeing?

Product Support Hardware & Firmware Help

Bry February 19, 2023, 7:14pm 2