Invert Switch Doesn't Invert the Lightbar When Dimming

[kreene1987]

#1: Shave the config button with some sandpapaper, or print or buy printed shorter config buttons:

Low Profile Config Buttons

There’s a lot of discussion of the issue with the config button the switches sticking out too much for some people’s taste. @P53 created a printable 3D model of a lower profile button. Lots of details in this thread. Config button interfering with paddle operation - #74 by kareem613. I just broke this out into it’s own thread so it’s easier to find. For those that don’t have a 3D printer or don’t want to modify their existing buttons, here’s an alternative option based on @P53’s model. It’s …

#2: Invert switch should work simply as a config parameter change. Nothing out of the ordinary. Up will be down, down will be up. Works perfectly in my testing on my red dimmers on current firmware.