LZW31-SN, Zigbee downlights and Home Assistant - Config help

[stu1811]

Just to clarfy… by latest firmware do you mean 1.57?

As far as parameter you want to set:
21 = 0 (No Netrual) or 1 (Neutral)
22 = 2 (Aux switch)
52 = 2 (SBM)

Then use this automation to dim the bulbs:

LZW31-SN Dimmer - Red Series Hold Button to Dim on Home Assistant

You could do something like this: alias: Office Brightness description: Set brightness on Smart bulbs when Switch is updated trigger: - platform: state entity_id: light.office_light condition: [] action: - service: light.turn_on target: entity_id: - light.office_rgb1 - light.office_rgb2 data: brightness: >- {% if state_attr('light.office_light', 'brightness') %}{{state_attr('light.office_light', 'brightness') }}{% else %}0{% endif …

Knowledge Base Redirect